|
Garage Southwest:
Tool rack
| Top row, left to right
| | Crowbar, 22in
| | Wrecking or pry bar, 15in
| | Electrical pulling tape
| | Box wrench, 1 5/16 in
| | Basin wrench, 15in long
| | Thermometer, alcohol type
| | Monkey wrench / Spanner, Ford
| | Pipe wrench, 6in
| | Pipe wrench, 10in
| | Strap wrench, 7in
| | Torque wrench, 150 ft-lb, 0.5in drive, Proto 6016-1
| | Upper section lower row
| | Carpenter's square, 12in
| | Two C-clamps, 3x4.5in (one in use)
| | Chisel, 0.25in
| | Hacksaw blade handle with blade
| | Bubble level
| | Coping saw, 7x5in (blade x depth)
| | Stab saw, 6in blade
| | Screwdrivers, set 1: Nut driver 1/4in; stubby 5/16in;
handle with 6 bits (torx, etc.); 5/16 x 3.5in; 1/4 x 3.5in;
1/8 x 4in
| | Channel Lock wrench, 12in
| | Sheet metal shears, 12in
| | Aircraft shears, Wiss M3 straight cut, 10in
| | Screwdrivers, set 2: 1/4 x 9in; Phillips #3 6in; 3/8 x 8in
| | Lower section upper row
| | Brace (auger drill), 14x5in
| | Hand drill, 1/4in Jacobs chuck (yellow plastic handle)
| | Hacksaw, 10in blade
| | Stab saw, 11in blade
| | Single ended saw for metal, 10.5in blade
| | Socket driver with U-joint, 8in
| | Vise-Grip pliers, Craftsman 45342, 7in
| | Crescent wrench set: 4,, 6, 8, 10, 12in
| | Socket wrench holder and sockets: metric 10-17mm (Craftsman 44307 etc)
and Imperial 3/8 - 11/16in (Craftsman 44331 etc)
| | Chain wrench, 11in
| | Bottom row
| | Rubber mallet
| | Hand drill, 1/4in Jacobs chuck (red wood handle)
| | File with handle, bastard (half round wood cut), 10in
| | File with handle, flat bastard (wood cut), 10in
| | File with handle, mill bastard (flat metal cut), 8in
| | File with handle, rat tail (round wood cut), 10in
| | Stab saw, 6in, for drywall
| | XActo knife, mat cutting blade
| | Plier set: 5x 5in: straight needle nose, bent, flat blade,
diagonal cutter, end nipper;
plus 2x 6.5in: needle nose, diagonal cutter
| | Box wrench sets: 7x metric 7-17mm; 5x Imperial 3/8 - 5/8in
| | Socket ratchet, 3/8in drive, 7in
| | Screwdriver set #3: 5/16 x 8in; 1/2 x 12in; 5/16 x 6in;
Phillips #3 6in; Phillips #2 4in; Phillips #1 3in
| | Small object trays
| | Spark gap leaf set
| | Xacto knife handle, 4in
| | Nail set 3in
| | Prick punch, 4in
| | Steel tape measure, locking, 1/2in x 12ft metric and Imperial,
Craftsman 39224
| | Allen wrench set, 6x metric 1.5-5.0mm, Craftsman 9-46686
| | Allen wrench set, 7x Imperial 5/64 - 1/4in
| | Screwdriver set #4: 1/8 x 2in; Phillips #0 2.5in
| | Ferrite core wrench, 6in
|
|
Next
Prev
Index
Zoom
|
